You are on PERI's international website. Click here to switch to PERI USA. Click here to view all PERI websites.

Projects

Toulouse-Blagnac Airport, France

Toulouse-Blagnac Airport, France - The semi-circular positioned reinforced concrete columns were concreted in one pour over the entire height of 11.75 m.
Toulouse-Blagnac Airport, France - High walls and columns in top architectural concrete quality – the VARIO wall formwork system provided the basis for realizing all demanding geometrical and surface requirements.
Toulouse-Blagnac Airport, France - The up to 5.44 m long and 9.72 m high wall sections could be concreted without any visible tie points.
Flughafen Toulouse-Blagnac, Frankreich - The 11.70 m high triangular-shaped reinforced concrete columns were accurately and cost-effectively formed in one pour with VARIO GT 24 column formwork.
Toulouse-Blagnac Airport, France - The new 40,000 m² passenger terminal – Hall D – features 24 check-in desks and 13 departure gates.
1
/
5

Project data

Location: Toulouse, France

40,000-m² passenger terminal with 24 check-in desks and 13 departure gates

Area: 780 ha

Requirements

High architectural concrete requirements:

  • special joint and tie arrangement in a chess board pattern
  • design of the plywood formlining joints as fine triangular-shaped pilaster strips
  • complete creation of the columns without anchor points
  • 9.72-m-high and 70-cm-thick shear wall without ties

Semi-circular positioned reinforced concrete columns with a triangular-shaped ground plan, total height of 11.75 m.

Customer

G.B.M.P., Tournefeuille; Socotrap, Roques-Sur-Garonne; G.C.C., Toulouse

Customer's benefit

  • high walls and columns of best architectural concrete quality
  • shear walls without visible tie points
  • one column a day of high architectural concrete quality with only 2 formwork sets
Eric Mantovani, Senior Site Manager
Eric Mantovani
Senior Site Foreman

Although this is the first time that we have worked with PERI systems, we were in a position to meet the architect's high demands. We are also more than satisfied with the support from PERI and the achieved results.

PERI solution

  • preproduction of the formwork units VARIO GT 24 with precisely positioned ties and blank cones
  • columns constructed in one pour for the complete height of 11.75 m with VARIO GT 24
  • transfer of the high concrete pressure also with heights of 11.75 m
  • PERI RCS and HD 200 for secure load distribution

PERI systems in use